FAQ

1. Table of each photopolymer exposure lead time.

*the photopolymer lead time suggested is directly related to the brand new light bulbs w/ 15watts and length of waves about 360 nanometer (nm).

For further information how to make resin stamps, please check out our Tutorial on YouTube

http://www.youtube.com/FLEXOGRAFF0029

Or Contact US.

The plastic ink is formed by solvents and petrol derivative used for engraving on even surfaces like as plastics, metals and etc. It is suggested for small jobs. It must be taken care of the resin cannot be kept in contact with the replacement pad much longer; otherwise it will be damaged in short time. Anyway, our suggestion is to use it and take it out of the self-inking stamp.

It should be avoided to re-ink the pads, because not all inks are appropriated for foam self-inking stamps.

In case of re-inking the pads, we suggest to use inks special for foams made of polyurethane.

For washing the engraved plate, it must be used a recipient in size of tray added about 01 cm height of water and mixed the revealing detergent proportioned. Use either a cloth or shoe brush on the engraved plate. Brush straight in lines for about 2 to 5 minutes.